JCV High Temperature And High Pressure Rapid Dyeing Machine, Winch
As an advanced Down-sliding High Temperature Dyeing Machine, it's
mainly suitable for dyeing and processing before and after of cross
woven fabric such as natural or synthetic fiber, cotton mixed &
blended fiber (T/C, T/R, T/W) etc, as well as Micro fiber and
complex fiber with high added values.
Sprayed water flow with high-pressuer and flow rate up to 3kg/cm2
is useful for dyeing non-splitting and non-piling cloth, like High
Count, New Synthetic Satin, Tricot, suede cloth, peach-skin
processing. Spraying in the proper range of 0.5-1 kg/cm2 can
satisfy special operating requirements of resilient fabric and
Key Technical Feature:
a. Short investment recovery period
b. Reduction of dyeing difference between troughs in batch
c. Increasing productive efficiency
d. Occupying a little area
Specially designed bending heads can meet the requirements of no
dead corner, small tension and bath ratio.
Low dyeing tension: Cloth-guiding roller, furnished with motor for
conveying cloth, can aid movement of cloth. Newly designed front
groove is located at low level, which shortens distnce between
driving roller and liquid surface, greatly decreased circulation
tension when transfering fabrics.
High loosening effect and even dyeing effect of fabrics: The jet
dyeing liquid movement produced by the high lift host pump attains
its best effect through the functioning of detwisting device,
rectifier and second impacting point in the rear, offering fabric
high loosening and rubbing, while at the same time, improving
dyeing effect as well as decreasing ceases.
Wide speed-adjusting range: Using the cloth-guiding box and
impacting point in the rear, cloth can run at high speed and still
be stacked in an orderly manner. In combination with the control of
cloth-lifting motor, cloth running speed can be adjusted randomly
Nozzle: Clearance can be adjusted according to the fabrics and
technologies to achieve optimal effect.
Number of tubes